Our steel woven wire storage lockers are a good solution for securing employee items or company equipment. Stored items are not accessible, but remain visible. The open but secure design allows in-plant lighting, ventilation, and fire suppression systems to work effectively throughout the secured area. Wire storage lockers can be installed individually or in groups, and can be configured to have one to four compartments. Lockers set up fast, and can be moved or reconfigured as needs change.
Our bulk storage lockers are an ideal way to secure resident's personal items in multi-family building common storage areas. The wire storage lockers add efficiency and organization to cluttered or unused storage space. The locker's open but secure design allows existing lighting, ventilation and fire suppression systems to function effectively throughout the secured areas.
Wire Storage Locker Features
- Two basic styles, single or double tier.
- Stock sizes: 7’ 6" tall, 3’ or 4’ wide, 3’, 4’, or 5’ deep.
- Pad lock lugs, with door strikes standard.
- Constructed of industrial grade materials.
- May be used individually or in a group.
- Styles may be mixed within a group.
- Easy installation-just two sections per locker, wall panel and door panel.
- Approval and Erection drawings supplied with each order.
Standard Wire Storage Lockers
Wire Storage Locker - Single Tier
Convenient, walk in, single tier lockers are ideal for most storage areas.
| Width |
Depth |
Height |
Weight* |
Stock Number |
| 3'-0" |
3'-0" |
7'-6" |
103 |
WC-LS 338 |
| 3'-0" |
4'-0" |
7'-6" |
113 |
WC-LS 348 |
| 3'-0" |
5'-0" |
7'-6" |
123 |
WC-LS 358 |
| 4'-0" |
3'-0" |
7'-6" |
112 |
WC-LS 438 |
| 4'-0" |
4'-0" |
7'-6" |
122 |
WC-LS 448 |
| 4'-0" |
5'-0" |
7'-6" |
132 |
WC-LS 458 |
*Weights listed are for two sided units.
Wire Storage Locker - Double Tier
Double tier lockers make the most efficient use of available space. Individual storage areas are accessed through doors 3'-9" high by 3' or 4' wide. Upper and lower storage cubes are separated by a reinforced 16-gauge steel divider.
| Width |
Depth |
Height |
Weight* |
Stock Number |
| 3'-0" |
3'-0" |
7'-6" |
132 |
WC-LS 338 |
| 3'-0" |
4'-0" |
7'-6" |
149 |
WC-LS 348 |
| 3'-0" |
5'-0" |
7'-6" |
165 |
WC-LS 358 |
| 4'-0" |
3'-0" |
7'-6" |
152 |
WC-LS 438 |
| 4'-0" |
4'-0" |
7'-6" |
171 |
WC-LS 448 |
| 4'-0" |
5'-0" |
7'-6" |
190 |
WC-LS 458 |
*Weights listed are for two sided units.
Wire Storage Locker Options
Tops - recommended if there is more than 6" between the locker and room ceiling.
Backs - Necessary when lockers are placed back to back or away from a building wall.
Bottoms - provide a uniform surface to stack items while protecting contents from damp basement floors.
Locks - Three point lock, recessed key lock, available.
Extra Width - Storage areas wider than 4 feet require an extra front panel.
Blind Storage - Sheet metal may be substituted for mesh, see solid lockers.
Material Specifications
All frames, dividers, and angle supports shall be punched with slotted holes for anchoring and assembly. Woven wire mesh shall be securely welded to all frames.
DOOR PANELS - Shall be framed in 1-1/4" x 1-1/4" x 1/8" angle with doors pre-hung at the factory. Single tier doors constructed with two diagonal and one horizontal stiffener of 1/4" x 3/4" flat bar behind mesh securely welded into a 1-1/4" x 1-1/4" x 1/8" frame. Double tier doors shall have a single diagonal stiffener behind the mesh. All doors supplied with door strikes, padlock lugs, and 2-1/2" x 2-1/2" spun-pin hinges welded in place.
WALL PANELS - Shall be framed on three sides with 1-1/4" x 1-1/4" x 1/8" steel angle, a 1/8" x 3" steel flat bar completes the frame.
WOVEN WIRE MESH - Shall be made of 10 gauge carbon steel wire inter-crimped and woven into 1" x 2" opening rectangular mesh.
DIVIDERS - Shall be formed16 gauge galvanized sheet metal fastened to a 1-1/4" x 1-1/4" x 1/8" angle support. Divider provided with double tier units; optional on single tier units.
BACKS (Optional) - Shall be 16 gauge galvanized sheet metal.
TOPS (Optional) - Sized to cover one or more lockers, shall be of same construction as door panels.
BOTTOMS (Optional) - Shall be 7/8" extruded vinyl profile (white only).
HARDWARE - Shall be 3/8" standard thread grade two plated nuts and bolts; 3/8" mechanical anchors for wall and floor mount-provided.
FINISH - All non-plated parts shall receive one prime coat of gray enamel.
