"Rack integrated Span-Track, a breakthrough in carton flow"

Span-Track is a unique, conveyor-like flow track. Span-Track sections can be added to any new or existing pallet rack, spanning and supported by the pallet rack beams. This takes advantage of the strength of the rack structure and makes maximum use of rack capacity since no shelves or intermediate supports are needed (as in the case with plastic wheel track). Span-Track offers greater flexibility, greater capacity and longer unsupported spans. Designed to fit existing pallet rack specs and easy to relocate for SKU changes.

High Capacity, High durability- Span-Track has higher capacity and higher durability than other carton flow systems available. It can withstand the rigors of active warehouses and sub-assemble plants. All metal construction with galvanized steel side channels and full width rollers carry loads up to 50 lbs. per ft. And unlike plastic wheels, they meet the test of repetitive impact loading. Span-Track rollers are ¾" diameter tempered aluminum with a full length 3/16" steel axle. Plastic wheel track simply doesn't compare. Stands up to heavy cartons and rough use.

Superior Carton Flow- Span-Track rollers give total carton support form load point to pick. A typical section offers 48" of product contact per foot. While two typical sections of plastic wheel offer only 11" of product contact per foot. Even rice paper corrugates flow on Span-Track's full width rollers. Now you can have carton flow that you can depend on to actually FLOW! Provides consistent, reliable feed with no hang-ups.

Very Economical- The primary cost of Span-Track is in the initial purchase of the track itself. By comparison, a high percentage of the cost of plastic wheel track is in the additional cost of shelves, special uprights, labor intensive installation and frequent replacement of plastic wheels. Span-Track installs in one-third the time, is easily relocated by one worker using no tools, and there are no replacement costs. On average, Span-Track offers 75% savings on installation over traditional plastic wheel carton flow systems because installation can be done in approximately 1/3 the time.

Three Models Available:

• High Profile- Installs on pallet rack beams. Can overhang front and/or back for contouring racks. Ideal for loose pick applications. Fully adjustable left, right, front & back. The front end of pan track acts as a raised carton stop. The rear end has a load bar to withstand impact loading. Both ends have 2" label holders built right in. Requires Retainer angle mount on full length of front & rear beam.
• Low Profile- Installs between pallet rack beams by use of front & rear beam hangers, saving vertical space for higher density live storage. Track lengths are available in 1" increments to fit all pallet rack dimensions. Drop-in design allows for easy addition to your existing rack without tools.
• Flow Deck- Adds to single deep rack. Reduces dead space in single deep rack. Packages push to the back of the shelf and flow forward when picked. Increase storage density and efficiency.

Span-Track offers:
Shelfless Installation
Easily Added to Any Pallet Rack
Up to 50 lbs. per ft. Capacity

Double your usable space with Flow Deck.*

*patent pending