www.rackandshelf.com
Corporate Info Products Get A Rack Quote Contact Us
      Feedback   Testimonials 
    WarehouseBlog.com 
Warehouse Rack & Shelf

Skip Navigation LinksHome Products Safety Products Woven Wire Partitions
Wire Partition Options & Specifications

 

Email This Page Add To Favorites

Doors
  • Hinge
  • Double Hinge
  • Sliding
  • Double Sliding
  • Lockable single hinged swing doors, double hinged swing doors, single sliding doors & double sliding doors available in a variety of sizes. Doors are constructed of similar materials to match panels. Door frames are covered with rolled steel channels where necessary. Each sliding door has (two) four wheel adjustable trolleys traveling in an enclosed overhead track. The door bottom is guided by a U-shaped floor guide. Each hinged door has 3 fixed butt hinges and a jamb bar.
    Service Windows
  • Slide Up
  • Drop Down
  • Slide-up or drop-down service windows have padlock hasps to provide for additional security. Service windows are installed at the factory.
    Panels Stock panels are manufactured in even widths of 1 ft. - 10 ft. and in heights of 1 ft. - 5 ft. The panels are installed stacking one panel over another using special welded connectors on each panel. Expandable panels are also available for spanning any gap for onsite adjustments by installer.
    Frame Vertical and horizontal members are 1-1/4" x 5/8" x 14 gauge "c" channels with uniformly spaced holes.
    Wire Mesh Wire mesh is made of 10 gauge triple crimped wire and is securely clinched into the vertical and horizontal frames. Wire is woven into a 1-1/2" pattern with the wires intersecting the channel frames at a 45 degree angle.
    Sweep Space There is a 3-5/8" sweep space between the bottom horizontal bar and the floor level.
    Finish Panels, doors and line posts are painted with on coat of high gloss machinery enamel. Some hardware items may be zinc plated.
    Hardware Necessary hardware including masonry lag bolts required for installation are included.
    Corner Posts Special tubular corner posts are fabricated from 2-1/2" square x 14 gauge tubular steel. The length of the post will equal the overall height of the assembled partitions. Posts have pads welded to one end for attachment to the floor.
    Line Posts 2-1/2" square x 14 gauge tubular steel posts are universally punched with slots and holes for mounting all types of panels and doors.
    Locks Each door is shipped with a bronze cylinder lock. The lock contains a 5-pin cylinder (1" standard) which may be master-keyed and keyed alike. A padlock attachment is also available.

    This page has been hit 7445 times.

     
    THE HIGHEST QUALITY, LOWEST PRICED NEW & USED RACKING, SHELVING & EQUIPMENT!

    Bernie J. McNamee, C.P.M. (636) 728-0008
    Brad McNamee (636) 728-1168   FAX


    Terms & Conditions